10R80, 10R100, 10L80, 10L90 D Clutch Installation | RTK-10R84

After installing the F clutch piston, return spring, retainer and apply ring, start the Torqkit assembly.

1. Install 1 single-sided OD Splined GPZ friction plate with the friction material facing up.
2. Install 2 single-sided ID Splined GPZ friction plate with the friction material facing up.
3. Continue alternating single-sided OD splined GPZ friction plates and single-sided ID splined GPZ friction plates until all 10 GPZ friction plates are installed ending with a single-sided ID splined GPZ friction plate.
4. Complete assembling the F clutch drum assembly and check clearance.

Clearance should be 0.048"-0.068."

Note: Clearance can be adjusted if necessary, using snap rings available ranging from 1.5mm to 2.5mm in .2mm increments.